Epson AcuLaser C9300 - Manual (Page 65)

5. Confirm the information about the printer’s port you want to configure, and then click Finish.
Items Explanations
The port Information The following items are displayed:
- Port Name
- Host Name or IP Address
- Protocol
Finish button Register the port information to the system and close the Add EpsonNet Print Port
Wizard.
Back button Go back to the printer list window.
Cancel button Close the Add EpsonNet Print Port Wizard.
The new printer port is created in your computer. To install the printer driver, see “Installing the
Printer Driver” on page 65.
Installing the Printer Driver
Install the printer driver that comes with your printer.
Note:
Some buttons in these steps may be slightly different depending on your operating system.
1. Insert the Software Disc shipped with the printer.
2. Close the Epson Install Navi screen if it appears.
Epson Network Guide
Network Software 65