Epson AcuLaser C9300 - Manual (Page 41)

Windows 2000
The printer driver installation procedure differs depending on the printing method you prefer.
LPR printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See “About EpsonNet Print” on
page 58 for details.
1. Click Start, point to Settings, and then select Printers.
2. Double-click Add Printer to start the Add Printer wizard, and then click Next.
3. Click Local printer, clear the Automatically detect and install my Plug and Play printer
check box, and then click Next.
Note:
You must clear the Automatically detect and install my Plug and Play printer check box because
the printer is attached directly to the network, not to a Windows 2000 computer.
Epson Network Guide
How To 41