Epson AcuLaser C9300 - Manual (Page 6)

Bar code Standard Epson BarCode OCR-B Check Digit Comments
Codabar EPSON Codabar No No Printing of OCR-B and check
digits can be specified with
the font name.
EPSON Codabar CD No Yes
EPSON Codabar CD
Num Yes Yes
EPSON Codabar Num Yes No
GS1-128(EAN128) EPSON EAN128 Yes Yes Creates GS1-128(EAN128)
barcodes.
System requirements
To use Epson BarCode Fonts, your computer system should meet the following requirements:
Computer: IBM PC series or IBM compatible with an Pentium/Celeron or higher CPU
Operating system * : Microsoft Windows 7, Vista, XP, Server 2008, or Server 2003
Hard disk: 15 to 30 KB free space, depending on the font.
* Epson BarCode Fonts can only be used with Epson printer drivers.
Installing Epson BarCode Fonts
Follow the steps below to install Epson BarCode Fonts. The procedure described here is for
installation in Windows XP; the procedure for other Windows operating systems is nearly the same.
1. Make sure that the printer is off and that Windows is running on your computer.
2. Insert your printer’s Software Disc in the CD/DVD drive.
Note:
If the Epson Installation Program screen does not appear automatically, click
Start , then click
Computer (for Windows 7, Vista or Server 2008) or click the My Computer icon on the desktop (for
Windows XP or Server 2003). Right-click the CD-ROM icon, click OPEN in the menu that appears,
then double-click EPSetup.exe.
3. When the Epson Installation Program screen appears, click Software List.
Epson Font Guide
Working with Fonts 6