Epson AcuLaser C9300 - Manual (Page 28)

If you are sending unformatted text to the printer directly from DOS or if you are using a simple
software package that does not include font selection, you can select fonts using the printer’s control
panel menus or by using EpsonNet Config with Web Browser when in the PCL, ESC/P 2, FX, or I239X
emulation mode.
Epson Screen Fonts (Windows Only)
Note:
If your printer is host based, Epson Screen Fonts are not included in the software CD-ROM because they
cannot be used with host based printers.
Epson Screen Fonts provide you with 131 software fonts.
System requirements
To use Epson Screen Fonts, your computer system should meet the following requirements:
Computer: IBM PC series or IBM compatible with an Pentium/Celeron or higher CPU
Operating system * : Microsoft Windows 7, Vista, XP, Server 2008, or Server 2003
Internet Explorer 4.0 or higher
Hard disk: At least 15 MB of free space
* Epson Screen Fonts can only be used with Epson printer drivers.
Installing Epson Screen Fonts
Follow the steps below to install Epson Screen Fonts. The procedure described here is for installation
in Windows XP; the procedure for other Windows operating systems is nearly the same.
1. Make sure that the printer is off and that Windows is running on your computer.
2. Insert your printer’s Software Disc in the CD/DVD drive.
Note:
If the Epson Installation Program screen does not appear automatically, click
Start , then click
Computer (for Windows 7, Vista or Server 2008) or click the My Computer icon on the desktop (for
Windows XP or Server 2003). Right-click the CD-ROM icon, click OPEN in the menu that appears,
then double-click EPSetup.exe.
Epson Font Guide
Working with Fonts 28