Epson AcuLaser C9300 - Manual (Page 16)

EPSON ITF EPSON ITF CD
EPSON ITF Num EPSON ITF CD Num
EPSON Codabar
❏ Four Codabar fonts are available, allowing you to enable and disable the automatic insertion of
check digits and OCR-B.
❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in
conformance to the Codabar standard. For this reason, it is important to keep at least one space
between the bar code and the surrounding text to prevent overlapping.
❏ When either a Start or a Stop character is input, Codabar fonts automatically insert the
complementary character.
❏ If neither a Start nor a Stop character is input, these characters are automatically input as the letter
“A”.
Character type Numbers (0 to 9)
Symbols (- $ : / . +)
Number of characters No limit
Font size When OCR-B is not used: 26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
When OCR-B is used: 36 pt to 96 pt. Recommended sizes are 36 pt and 72 pt.
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
Epson Font Guide
Working with Fonts 16