Epson AcuLaser C9300 User Manual
Page 13
❏ The numeral “0”
Print sample
EPSON UPC-E
EPSON Code39
❏ Four Code39 fonts are available, allowing you to enable and disable the automatic insertion of
check digits and OCR-B.
❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in
conformance to the Code39 standard. For this reason, it is important to keep at least one space
between the bar code and the surrounding text to prevent overlapping.
❏ Spaces in Code39 bar codes should be input as “_” underbars.
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or select a font
other than a BarCode Font and input the space. If a space is input while a Code39 font is selected,
the bar code will not be correct.
Character type
Alphanumeric characters (A to Z, 0 to 9) Symbols (- . space $ / + %)
Number of characters
No limit
Font size
When OCR-B is not used: 26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
When OCR-B is used: 36 pt to 96 pt. Recommended sizes are 36 pt and 72 pt.
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
❏ Check digit
❏ Start/Stop character
Print sample
Epson Font Guide
Working with Fonts 13