Epson AcuLaser C9300 - Manual (Page 17)

❏ Start/Stop character (when not input)
❏ Check digit
Print sample
EPSON Codabar EPSON Codabar CD
EPSON Codabar Num EPSON Codabar CD Num
EPSON EAN128
❏ GS1-128(EAN128) fonts support code sets A, B, and C. When the code set of a line of characters is
changed in the middle of the line, a conversion code is automatically inserted.
❏ The following 4 kinds of the properties are supported as the Application Identifier (AI).
01: Global traded item number
10: Batch / Lot number
17: Expiry date
30: Quantity
❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in
conformance to the Code128 standard. For this reason, it is important to keep at least one space
between the bar code and the surrounding text to prevent overlapping.
❏ Some applications automatically delete the spaces at the end of lines or change multiple spaces into
tabs. Bar codes containing spaces may not be correctly printed from applications that
automatically delete spaces from the ends of lines or change multiple spaces into tabs.
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or select a font
other than a BarCode Font and input the space. If a space is input while GS1-128(EAN128) is
selected, the bar code will not be correct.
Epson Font Guide
Working with Fonts 17