HP EliteBook 840 G3 - Manual (Page 95)

device name, and then click Connect. To disable the device, click on the device name, and then click
Disconnect.
● Be sure that the wireless device is turned on.
● Be sure that the computer wireless antennas are free from obstructions.
● Be sure that the cable or DSL modem and its power cord are properly connected and that the lights are
on.
● Be sure that the wireless router or access point is properly connected to its power adapter and to the
cable or DSL modem, and that the lights are on.
● Disconnect and then reconnect all cables, and turn the power off and then back on.
A movie is not visible on an external display
1. If both the computer display and an external display are turned on, press fn + f4 one or more times to
switch between the 2 displays.
2. Configure the monitor settings to make the external display primary:
a.
From the Windows desktop, right-click on a blank area of the computer desktop, and select Screen
resolution.
b. Specify a primary display and a secondary display.
NOTE: When using both displays, the DVD image will not appear on any display designated as the
secondary display.
Resolving issues 85