Epson 60 User Manual
Page 93
❐ WIDE PAGE: When this feature is ON, you can print up to 80 characters at 10 cpi
across an A4 page. When it is OFF, you can print up to 77 characters at 10 cpi. The
setting is only valid when PAGE SIZE is at A4. If you change the WIDE PAGE set -
ting when another size is selected, L-MARGIN automatically defaults to 0 and
R-MARGIN and TEXT LINES return to the default setting for the currently selected
paper size.
❐ B-IMAGE: With B-IMAGE set to DARK or LIGHT, your printer can correctly emulate
the graphics densities set with the printer commands. When you select DARK, the
bit image density is high. When you select LIGHT, the bit image density is low.
Available Options: DARK, LIGHT, BCODE
The BCODE setting converts bar codes to bit images by automatically filling in any
vertical gaps between dots. This produces unbroken vertical lines that can be
scanned by a bar code reader.
Note:
This mode reduces the size of the image being printed and may cause
some distortion when printing bit image graphics.
Example Procedure: Change the PITCH setting to 12 cpi.
1. Enter Level 1 mode (see page 26).
2. Press
or
until SUB CONFIG. is dis -
played.
3.
If PITCH is not displayed, press
or
until it is.
4.
5. Press
or
until the required setting is dis -
played.
6. Store the displayed setting:
7.
8.
twice to return to printer "Ready" mode.
APPENDIX C. EPSON LQ AND FX EMULATION MODES
C-5