Epson 60 User Manual
Page 47
AUTO CONT (Auto Continue)
When you switch this feature ON, the printer will continue printing after a certain period
of time when one of the following error occurs: SET FULL PRINT, PAGE BUFFER
FULL, PAPER SIZE ERROR, TRAY SET xxx, INSUFF MEMORY
If this feature is OFF, you will have to press the
button to continue printing.
In most cases, leave this feature OFF. The warning on page 44 explains why.
1. Enter Level 2 mode (see page 34).
2. Press
or
until AUTO CONT. is displayed.
3. To change the current setting:
4. Press
or
until the required setting is dis -
played.
5. Store the displayed setting:
6.
twice to return to printer "Ready" mode.
P-CONFIG SAVE (Power-up Configuration)
Use this feature to save your Level 2 settings so that they will take effect each time you
switch your printer on.
1. Enter Level 2 mode (see page 34).
2. Press
or
until P-CONFIG SAVE is dis -
played.
3.
4. To save the current Level 2 settings:
5.
twice to return to printer "Ready" mode.
Note:
If you ever need to return the printer to the factory settings, see FACTORY RE -
SET (page 42).
ADJUSTING THE PRINTER SETTINGS
41