Epson 60 - Manual (Page 91)

SUB CONFIG.
The SUB CONFIG. is a menu within Selectype Level 1. It contains these features.
❐ PITCH: Use this to select a character pitch of 10, 12, or 15 characters per inch (cpi),
or proportional spacing (PROP). A setting of 10 provides more space between char -
acters, and 15 provides less.
❐ CONDENSED: Use this to change the character spacing. Condensed printing is use -
ful for spreadsheets and other applications where you need to fit a lot of information
on each line. Fonts with a pitch of 15 cpi cannot be condensed.
❐ L-MARGIN: Use this to set the left margin. Margin units are determined by the cur -
rent pitch (cpi) and the condensed setting (on or off). The factory setting is 0.
If you select proportional, 10 cpi and condensed determine the margin units. If you
change the setting of ORIENT, PAGE SIZE, or WIDE PAGE (when PAGE SIZE is
set to A4 [8.3" x 11.7"]), the left margin defaults to 0.
❐ R-MARGIN: Use this to set the right margin. Margin units are determined by the cur -
rent pitch (cpi) and the condensed setting (on or off). The factory setting is 80.
If you select proportional, 10 cpi and condensed determine the margin units. If you
change the setting of ORIENT, PAGE SIZE, or WIDE PAGE (when PAGE SIZE is
set to A4 [8.3" x 11.7"]), the right margin defaults to the following setting.
Paper Size Condensed Portrait Landscape
10 cpi 12 cpi 15 cpi 10 cpi 12 cpi 15 cpi
A4 OFF 77 93
116
111 134
167
ON 133 155 191 223
A4-80 col OFF 80 96
120
111 134
ON 137 160 191 223
Letter OFF 80 96
120
105 126
157
ON 137 160 180 210
Legal OFF 80 96
120
135 162
202
ON 137 160 231 270
APPENDIX C. EPSON LQ AND FX EMULATION MODES
C-3