Epson 60 - Manual (Page 63)

Character Clipping
If a character is partially outside the printer area, the HP LaserJet mode clips it and the
part outside the printer area is not printed.
Paper Handling
When using HP emulation mode, the paper size is not determined by the paper cas -
sette as it is with a HP LaserJet series III printer. Use the PAGE SIZE feature (see
page 27) to select the paper size that you need.
Downloaded Fonts
When the machine is in the 3/P/Si emulation mode, you can download fonts to the ma -
chine in the same manner as you would download to a Hewlett-Packard LaserJet
printer.
Resident Fonts
The printer offers a variety of fonts in HP emulation mode. The following table lists
these fonts.
When using your application software to select a font, use the font names in the right
hand column of the table.
Fonts Font name in HP emulation mode
Courier: Standard, bold, italic Courier
Line printer Line printer
Epson Roman T, standard, bold, italic,
bold italic CG Times
Epson sans serif U standard, italic, bold,
bold italic, medium condensed*, bold
condensed*, medium condensed italic*,
bold condensed italic* Univers
ITC Zapf Dingbats* ITC Zapf Dingbats
Note: The five fonts marked with an asterisk (*) are only available with a LaserJet II -
ISi driver or by using a printer command.
APPENDIX B. HP EMULATION MODE
B-2