Eagle Electronics 642c iGPS - Manual (Page 98)

92
frequently lose and reacquire its lock on a WAAS satellite. That can
result in the alarm repeatedly going off. If you want, turn off the WAAS
Acquired/Lost alarm without affecting how the unit uses WAAS.
To turn off WAAS alarm:
1. Press MENU | MENU |
↓ to
GPS S
ETUP
| ENT |
↓ to
S
HOW
WAAS A
LARM
.
2. Press ENT to turn it on (check) or turn it off (uncheck). After the op-
tion is set, press EXIT | EXIT to return to the page display.
3. To turn the alarm on again, repeat Steps 1 and 2.
Software Version Information
From time to time, Eagle updates the operating system software in
some of its products. These software upgrades usually are offered to
customers as free downloads from our web site, www.eaglegps.com. The
upgrades make the unit perform better or introduce new features and
functions. Use the software information command to see what software
version is running in your unit.
Main Menu with Software Information selected (left).
The Software Information screen (right).
Press MENU | MENU |
↓ to
S YSTEM S ETUP
| ENT |
↓ to
S OFTWARE
I NFORMATION
| ENT . To return to the page display, press EXIT repeatedly.
Sounds Menu
To adjust Sounds and Alarm Styles:
Press MENU | MENU |
↓ to
S
OUNDS
| ENT .
To set Key Press Sounds: Press ENT to turn them on (check) or turn
them off (uncheck).
To set Alarm Sounds: Press
↓ to
A
LARM
S
OUNDS
. With the option high-
lighted, press ENT to turn them on (check) or turn them off (uncheck).