Eagle Electronics 642c iGPS - Manual (Page 109)

103
Find Any Item Selected by Map Cursor
On the Map Page with a POI or map feature selected by the cursor
press
WPT. To return to the main page display, press EXIT .
NOTE:
Since the Go To waypoint command is highlighted, you can navi-
gate to the selected POI by pressing
ENT | EXIT while in the POI
Waypoint Information screen.
Find Interstate Highway Exits
1. From the Map Page, press MENU |
↓ to
H IGHWAY E XITS
| ENT , which will
launch the Find Exit menu.
Find Highway Exits command (left) and Find Exit menu (right).
2. First, select a highway name by pressing ENT , which calls up the
Find By Name menu. There are two highway search options: A. You
can spell out the highway name in the top selection box. Press
↑ ↓ to
change the first letter, then press
→ to move the cursor to the next let-
ter and repeat until the name is correct, then press ENT | ENT . B. Jump
down to the lower selection list by pressing ENT , then press
↓ ↑ to select
a highway from the list, then press ENT .