Eagle Electronics 642c iGPS - Manual (Page 67)

61
In Fig. 3 the traveler has turned northeast on his new course and is
heading straight for Wpt 2, which is 0.20 miles away. Fig. 4 shows route
navigation on the Map Page. In this figure, the traveler has reached Wpt
2 and is starting on the leg between Wpts 2 and 3.
Navigate a Route in Reverse
Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the N
AVIGATION
P
AGE
, press MENU | ENT or from the M
AP
P
AGE
,
press MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .
2. Press
↓ to saved route name|
ENT . Press
↓ → to
R
EVERSE
| ENT |
← to
N
AVIGATE
| ENT .
3. Upon arrival at your destination, cancel navigation:
press
MENU | MENU |
↓ to
C ANCEL N AVIGATION
| ENT |
← to
Y ES
| ENT .
Edit Route screen showing Route 1 with waypoints set to normal navi-
gation (left). Reverse command has been executed (center) reversing the
order of waypoints on the route. Pressing Navigate (right) will allow
you to navigate the route from the end to the beginning.
Figure 4. Figure 3.