beautypg.com

Find addresses – Eagle Electronics 642c iGPS User Manual

Page 106

background image

100

To search somewhere else, use the arrow keys to center the cursor
crosshairs on the desired location. When the cursor is active, the
unit always begins searching at the cursor location.

In search results, the distance and bearing to the selected item will be
calculated from the current position. In the case of a cursor search, the
search results show distance and bearing from the cursor.

Find Addresses

1. From the Map Page, press

MENU

|

↓ to

F

IND

A

DDRESS

|

ENT

.

2. Press

ENT

to search in the Address field.

3. To enter an address, press

↑ ↓ to change the first number, then press

→ to move the cursor to the next number and repeat until the address
has been entered correctly, then press

ENT

.

Figure 1: Find Address Menu (from left to right). Figure 2: Address en-

try is complete. Figure 3: The Find Street menu with Find By Name

field active. Figure 4: Street name entry complete.

4. To enter a street name, press

↓ to

S

TREET

|

ENT

. There are two options:

A. You can spell out the name in the top selection box. Press

↑ ↓ to

change the first letter, then press

→ to move the cursor to the next let-

ter and repeat until the name is correct, then press

ENT

|

ENT

. B. Jump

down to the lower selection list by pressing

ENT

, then use

↓ ↑ to select a

street name from the list, then press

ENT

. The street name you selected

is now in the street field.

5. To enter a city name, press

↓ to

C

ITY

|

ENT

. You will be asked if you

want to find addresses within a particular city. This option is designed
so you can limit an address search to a single city if necessary.

If you select yes, there are two options: A. You can spell out the city
name in the top selection box. Use

↑ ↓ to change the first letter, then

press

→ to move the cursor to the next letter and repeat until the name

is correct, then press

ENT

|

ENT

. B. Jump down to the lower selection list

by pressing

ENT

, then press

↓ ↑ to select a city name from the list, then

press

ENT

. The city name you selected is now in the city field.