Eagle Electronics 642c iGPS - Manual (Page 46)

40
Sequence for setting a waypoint. Step 1: while traveling, press WPT to
call up Find Waypoint screen (seen in Step 2) and set a point. Step 3: a
message says the waypoint has been saved. Step 4: vehicle continues
on its way; number waypoint symbol is visible on map.
Create Waypoint on Map
1. Use the arrow keys to move the cursor to the place where you want
to make a waypoint.
2. Press WPT | WPT . The waypoint is saved and automatically given a
name with a sequential number, such as waypoint 001. The waypoint
symbol and number appear on the map.
Create Waypoint by Entering a Position
1. Press WPT |
↑ to
M
Y
W
AYPOINTS
|
→ to
N
EW
| ENT .
2. Press
↓ to
E
NTERED
P
OSITION
| ENT |
→
to C
REATE
| ENT .
3. Press
→
to L ATITUDE
| ENT . Enter the latitude by pressing
↑ ↓ to
change the first character, then press
→ to the next character and re-
peat until the latitude is correct. Press ENT .
Step 3. Step 4.
Step 1. Step 2.