Enterasys Networks SNS-TAG-LPA - Manual (Page 27)

Rack Mounting
SNS-TAG-HPA / SNS-TAG-LPA Installation Guide 2-5
Mid-Mount
The appliance ships with a mid‐mount accessory kit. Figure 2‐2 shows the appliance installed in a
rack, with the front mount attached, and a mid‐mount placement example.
To attach the appliance to the rack, perform the following steps:
1. Use the two mounting holes closest to the center of the appliance for more balanced mounting
position.
2. Use the M4 screws (2 screws for each side) to secure the center mounting bracket to the
appliance. When securing the appliance to the rack, use the M5 screws to secure the chassis to
the post of the rack.
Figure 2-2 Rack Mounting—Mid-Mount