Enterasys Networks SNS-TAG-LPA - Manual (Page 20)

Appliance Back Panel
1-2 Appliance Overview
Appliance Back Panel
Figure 1‐2 shows the appliance back panel.
Figure 1-2 Back Panel
Table 1-1 Control Button Functions
Button Function
Power Toggles the system power on/off.
Reset Performs a soft system re-boot.
UP/DOWN Displays configured appliance parameters on the LCD.
• Appliance IP Address
• Gateway IP Address
• Appliance Network Mask
• Management Server IP Address
ENT Displays the installed TAG software version number on the LCD.
ESC Displays “Enterasys Networks” on the LCD.
A. Video connector D. Console connector
B. NIC1 connector (Eth 0) (10/100/1000 Mbit) E. Power supply
C. NIC2 connector (Eth 1) (10/100/1000 Mbit) F. Power connector
Note: The LEDs on the NIC connectors are not functional.