Melinera WB-1661 - Manual (Page 10)

12 GB/MT
• Keep children away from the construction area
while assembling the product.
• Dispose of the packaging materials in accor-
dance with regulations.
• Caution! Keep away from fire. Do not stand
the product close to a fire or other source of
heat, e.g. radiators.
• Do not use with lit candles!
• The product is not a climbing frame or a toy.
• Only stand the product on a smooth, horizon-
tal surface. Otherwise there is a risk that it
could tip over.
Caution – may cause damage to
property!
• Only use the article indoors. The product may
fly away if used outdoors.
Assembly
Figure (B)
Open the stand legs on the Christmas tree stand
at an angle of 90 degrees to one another and
turn the fixing screws loosely into the relevant
drill holes.
Figure (C)
Insert the lower trunk into the tree stand and
tighten the screws. Then insert the upper trunk
into the opening on the lower trunk.
Figure (D)
Insert the branches with hook structures into the
trunk. Begin at the top and work down: 6 x (A)
red; 6 x (B) blue; 6 x (C) green, 6 x (D) yellow;
6 x (E) grey; 6 x (F) orange
Figure (E)
Insert the top of the tree into the opening on the
upper trunk.
Figure (F)
Bend the branches into the desired position.
Now you can decorate the tree with the decora-
tions and electrical fairy lights.
Cleaning, care
• If the product becomes a little dusty clean the
branches with a dry cloth. Never clean it with
harsh cleaning materials!
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following instructions for use. Use the product
only as described and only for the given areas
of application. Keep these instructions safe.
When passing the product on to a third party,
always make sure that the documentation is
included.
Parts list and scope of
delivery (Figure A)
36 x branches with hook structures
6 x (A) red
6 x (B) blue
6 x (C) green
6 x (D) yellow
6 x (E) grey
6 x (F) orange
1 x (G) Lower trunk
1 x (H) Upper trunk
1 x (I) Top of tree
1 x (J) Tree stand
3 x (K) Fixing screws
1 x Instructions for use
Technical data
Size: approx. H 180 x Ø 110cm
Material: metal, PVC
Correct use
This product is designed as an artificial Christ-
mas tree for private, indoor use.
Safety notes
Risk of injury!
WARNING!
• Risk of suffocation for children! Do not allow
children to play with the packaging material
without supervision.
• The scope of delivery includes some small
parts. They can endanger life if swallowed or
inhaled.