Florabest FLV 1200 A1 - Manual (Page 54)

54
GB
Functional description
The verticuttor and lawn aerator has two
easily exchangeable work cylinders:
An aerator cylinder made of hard plastic
with vertically rotating sprung tines, and a
verticutor cylinder with vertically mounted
high-grade steel knives.
The implement features a high-quality plas-
tic case with collection bag and a handle
bar with a folding function. Please refer to
the subsequent descriptions for the actual
functions of the individual control elements.
Technical data
Motor input ............................... 1200 W
Rated voltage ............230-240 V~, 50 Hz
Protection Class ............................... II
Degree of protection ......................... IP24
Rotating speed of the tool
(n
o
) ........................... 3500 min -1 (r.p.m)
Cylinder width ...............................31 cm
Readjustment range for wear ............9 mm
Volume collection bag .......................30 l
Weight ........................................ 9.9 kg
Acoustic pressure level
(L
pA
) ..................84 dB (A); K
pA
= 3 dB(A)
Sound power level (L
wA
)
Measured ........99 dB (A); K
wA
= 4 dB (A)
Guaranteed ....................... 103 dB (A)
Vibration (a
n
) ............... 4 m/s 2 ; K= 2 m/s 2
The noise and vibration values were estab-
lished by the standards and stipulations
listed in the Conformity Declaration.
Technical and visual changes can be
completed in the course of further develop-
ment without notification. Consequently, all
dimensions, references and details in these
Operating Instructions are without guar-
antee. Consequently legal claims based
on these Operating Instructions cannot be
asserted.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the op-
erating cycle are to be considered,
including, for example, times during
which the power tool is turned off
and times when the tool is turned on
but is running idle).
Safety precautions
This section covers the basic safety instruc-
tions when working with this implement.
Symbols used in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.