Florabest FLV 1200 A1 - Manual (Page 53)

53
GB
familiar with these Instructions must not be
allowed to use this implement. Never oper-
ate this implement while it is raining and in
a wet environment.
The owner or operator is responsible for
accidents or harm to people and their
property.
The manufacturer cannot be held liable for
damage caused by incorrect operation of
the implement or if it is not used in conform-
ity with its intended purpose.
General description
Scope of delivery
Carefully unpack the implement and check
that all the subsequently listed parts are
complete:
• Implement case with verticuttor cylinder
and impact protector
• Aerating cylinder
• Upper handle bar complete with start-
ing lever, power plug, unlocking button
and firmly mounted power cable
• Lower bar
• 2 centre bars
• Collection bag
• Cable strain relief
• 2 cable clamps
• Mounting accessories:
- 2 Philips screws, 4 screws and 4
wing nuts to fasten the bar
- Spanner to change the cylinders
• Instruction Manual
Overview
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
A 1 Unlocking button
2 Starting lever
3 Upper handle bar
4a+b 4 screws and 4 wing nuts to se-
cure the bar
5 Collection bag
6 Impact protector
7 Lower bar
8 Implement case
9 Setting button
10 2 rear wheels
11 2 wheels
12 Machine cable terminal
13 Spanner
14 Tool holder
15 2 centre bars
16 Machine cable terminal
17 Electric cable
18 Cable strain relief
19 Machine cable
20 Aerator cylinder with sprung
tines
21 Verticutor cylinder with knives
B
22 Fastening screw
C 23 Collection bag rods
E 24 Square receptacle