beautypg.com

Assembling instructions, Mt gb – Florabest FGS 72 A1 User Manual

Page 59

background image

59

MT

GB

battery and equipment could be

damaged and they consume energy

unnecessarily in case of longer

charging time. Overcharging invali-

dates the guarantee.

• Before initial use, charge the battery

installed in the equipment. Do not

charge the battery for several short pe-

riods in succession.

• Use the charger supplied to charge

the Li-ion battery installed in the equip-

ment.

• Recharge the battery if the equipment

runs too slowly.

• In all cases, observe the applicable

safety information as well as the regu-

lations and directions for environmen-

tal protection.

• Defects resulting from improper han-

dling are not subject to the guarantee.

1. Connect the charger cable plug

(22) with the charger socket on

the tool (5).

2. Connect the power supply unit

(21) to a socket.

The charging indicator (4) lights

up:

Red: Equipment charging.

Green: Charging finished.

The recommended charging time

is max. 3 – 5 hours.

3. After the recharging process is

completed, first unplug the charg-

er from the wall outlet, and then

remove the charger cable plug

from the tool.

Assembling instructions

Inserting/replacing the

blade

before replacing the blade,

ensure that the equipment is

switched off in order to avoid

danger and injuries!

Inserting the blade

1. Place the cutting head (1) on

the grass trimming blade (9) or

shrub trimming blade (11) such

that the arrow and markings are

aligned.

2. Push the end of the blade

towards the unlock but-

ton (7). It clicks audibly

into place.

Removing the blade:

3. Push the unlock button (7) up-

wards on the equipment and

remove the entire blade.

If the blade drive (23) has turned

around, turn it by hand until you

can position the blades (9/11).

Assembling the telescopic

shaft

For packaging reasons, the tel-

escopic handle is delivered in two

sections. When connected together,

the two sections lock into each other

and cannot subsequently be de-

tached.

Connecting the telescopic

tubes:

1. Insert the two sections of the tel-

escopic tube (15) into each other