Epson 20 - Manual (Page 32)

Starting the Setup Program
Follow these steps to start the Setup program:
1. Insert the working copy of your Reference diskette into the
diskette drive.
2. Press the RESET button (shown below) to reset the computer.
(See Chapter 4 for more information about resetting the
computer.)
RESET button
After the computer performs its self test, it loads the setup and
diagnostics programs automatically from the diskette and displays
this menu:
OPERATIONMENU
__
1-Setup
2-Format hard disk
3-System diagnostics
4-Prepare hard disk for moving
0-Exitto DOS for more utilities
Enter selection number:-
This is the menu for the setup and diagnostics programs on the
Reference diskette. The first option, Setup, is the only one you
need at this point. (See the appendixes in this manual for
information about the diagnostics programs.)
2-2 Running
the Setup Program