Selecting a drum set, P. 27)) – Edirol SD-80 User Manual
Page 27
27
Using the internal sound generator
Using the internal
sound generator
Selecting a drum set
If the part type is Drum Set, use the following procedure to select a drum set. First make sure that the part
type is Drum. For details on how to set the part type to Drum, refer to
"Selecting the type of part (INST/
For details on the drum sets that are available, refer to
"Instrument list (GM2 / Native mode)"
*
Drum sets do not have variation sounds.
fig.5-07
1.
Press
[INST]
.
The button will light.
fig.5-07a_67.2
2.
Turn the
[VALUE]
dial to select a drum set. The drum
set name shown in the display will change.
1
2