Extron electronic TP Receivers - Manual (Page 9)

TP Receivers • Introduction 1-3
The TP receivers only receive signals transmitted by Extron
TP transmitters. This user manual documents installation,
features, and operation of the TP receivers only. For information
about the TP transmitters, refer to the TP Transmitters Family
User’s Manual , TP T 15HD 45 and TP T A 45 Manual, or the
VTT001/TR001 Transmitter and Receiver Manual , as applicable,
which accompanies the transmitters.
Features
All Extron TP receivers provide the following features:
Audio output —
Provides unbalanced (left/right) audio on RCA
connectors, and balanced or unbalanced audio on 3.5 mm,
5-pole captive screw connectors.
Level control — Allows manual control of image brightness.
Peaking control — Allows manual control of image sharpness.
TP R BNC A receiver
The TP R BNC A receiver has the following features:
Video output —
Provides RGBHV, RGBS, or RGsB video on
5 BNC connectors.
RJ-45 connector — Allows attachment to an Extron TP
transmitter.
Cable length compensation — Compensates for long cable runs
automatically or manually.
Mounting —
Mounts in a rack with an Extron 1U Universal Rack
Shelf Kit (part #60-190-01) or 1U Basic Rack Shelf (part
#60-604-02).
Mounts to a projector mounting bracket with the Extron
Pole Mount Kit, PMK 200 (part #70-077-04).
Mounts under or through furniture with an Extron
Under-Desk Mounting Kit (part #70-077-01) or
Through-Desk Mounting Kit (part #70-077-02).