Extron electronic TP Receivers - Manual (Page 36)

TP Receivers • Specifications, Accessories, and Part Numbers
Specifications, Accessories, and Part Numbers cont’d
A-2
Specifications, Accessories, and Part Numbers
Specifications
Video
Number/signal type .................... 1 or 2 sets of proprietary analog signals
Connectors .................................... 1 or 2 shielded RJ-45 female
Video input — refer to the TP Transmitters Family
User’s Manual, part #68-546-02
Video output
Number/signal type
TP R BNC A ........................ 1 analog RGBHV, RGBS, RGsB, component
video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM
composite video from a single source; or
3 NTSC/PAL composite video from a
single source
TP R BNC AV ..................... 1 analog RGBHV, RGBS, RGsB, component
video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM
composite video from a single source; or
3 NTSC/PAL/SECAM composite video
from a single source
and 1 NTSC/PAL/SECAM composite
video
TP R 15HD A ...................... 1 analog RGBHV, RGBS, RGsB, component
video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM
composite video from a single source; or
3 NTSC/PAL composite video from a
single source
Connectors
TP R BNC A ........................ 5 BNC female
TP R BNC AV ..................... 6 BNC female
TP R 15HD A ...................... (1) 15-pin HD female
Nominal level ................................ 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of
component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ 0.3 V to 1.45 Vp-p
Impedance ...................................... 75 ohms
Maximum resolution .................... 1600x1200