Extron electronic TP Receivers - Manual (Page 8)

TP Receivers • Introduction
Introduction, cont’d
1-2
Introduction
About the TP Receivers
The TP R BNC A, TP R BNC AV and TP R 15HD are Extron
Twisted Pair (TP) receivers that receive transmissions of RGB
video, component video, S-video, composite video, and stereo
audio over Extron Enhanced Skew-Free™ A/V UTP cable or
standard Category (CAT) 5 unshielded twisted pair (UTP),
shielded twisted pair (STP), or foil shielded twisted pair
(FTP) cable. Standard transmission distance is shown in the
tables below. Minimum reliable transmission distance for the
TP R BNC A and TP R BNC AV is 50 feet. The TP R 15HD A
provides reliable reception and high quality video output
without minimum distance limitations.
Maximum distance is determined by the output frequency
and resolution. The following table specifies recommended
maximum transmission distances using Extron Enhanced
Skew-Free A/V UTP cable or UTP CAT 5 cable, terminated with
CAT 6, or at least CAT 5e, rated connectors.
N Extron recommends using the highest quality
pre‑terminated and tested cable. Cables terminated on
site should be tested to ensure compliance with Category
5e specifications.
Recommended transmission ranges at 60 Hz,
TP R 15HD A
Video format Maximum range
Composite video and audio 800 feet
Component video and S-video 800 feet
640 x 480 500 feet
800 x 600 400 feet
1024 x 768 300 feet
1280 x 1024 200 feet
1600 x 1200 150 feet
Recommended transmission ranges at 60 Hz,
TP R BNC A and TP R BNC AV
Video format Maximum range
Composite video and audio 1000 feet
Component video and S-video 1000 feet
640 x 480 1000 feet
800 x 600 800 feet
1024 x 768 600 feet
1280 x 1024 400 feet
1600 x 1200 300 feet
N While it is possible to exceed recommended distances,
image quality may be reduced.