beautypg.com

Kcl-adapter kit-5b – Kichler 337005 User Manual

Page 6

background image

Fig. 11

Fig. 12

4. Loosen the two set screws in the motor

coupling until the inside channel is clear of
the screws. Remove the Safety Pin and
Locking Clip in the top of the motor
coupling. (Fig. 11)

5. Carefully feed the fan lead wires up

through the downrod. Thread the downrod
into the motor coupling until the Safety Pin
holes are aligned. (Fig. 11)

Next, replace the Safety Pin and secure

with the Locking Clip. Securely tighten
both set screws. (Fig. 11)

6. Slip the coupling cover, mounting screw

cover and canopy onto the downrod in the
order shown. (Fig. 12)

7. Thread the Slope Adaptor Hanger Ball

onto the downrod until the Safety Pin
center hole on the Ball aligns with the
safety pin hole in the downrod. Insert the
safety pin (careful not to damage the lead
wires.) (Fig. 12)

5

Slope adaptor
hanger ball

Safety Pin

Downrod

Canopy

Mounting screw
cover

Coupling cover

Supply wires

Downrod

Safety pin

Lock pin

Set screws

Coupling

Set screws