Kcl-adapter kit-4b – Kichler 337005 User Manual
Page 5
4
SLOPE CEILING ADAPTER
Fig. 8
Fig. 9
Fig. 10
INSTALLING THE HANGING
BRACKET TO MOUNTING
PLATE ASSEMBLY
1. Remove the canopy cover from the
canopy by turning the cover counter
clockwise. This will enable you to
remove the hanger bracket. (Fig. 8)
2. Attach the hanger bracket to the
mounting plate using the two hex nuts
and washers and lock washers provided.
(Fig. 9)
DO NOT tighten completely at this point.
Allow hanger bracket to rotate but hold
the weight of the ceiling fan.
3. If you plan to use the downrod
packaged with your ceiling fan, remove
the hanger ball by loosing the set screw,
unscrewing the safety pin and
unscrewing the hanger ball. If you are
using a different downrod, skip to the
next step. (Fig.10)
Downrod
Safety pin
Hanger
ball
Set screw
Flat washers
Lock washers
Hex nuts
Hanger
bracket
Ceiling
canopy
Screws
Canopy
cover
- 3000 (2 pages)
- 4100 (2 pages)
- 12011 v.2 (1 page)
- 10566 (2 pages)
- 10579 (1 page)
- 10190BK60 (1 page)
- 10570 (1 page)
- 10215 (1 page)
- 12211 (1 page)
- 10198 (1 page)
- 10589 (1 page)
- 9592 (1 page)
- 12068 (4 pages)
- 12501 v.2 (1 page)
- 12353WH v.2 (1 page)
- 12382 (2 pages)
- 12382 (1 page)
- 12383 (1 page)
- 15070 (2 pages)
- 15215 (1 page)
- 4200 (1 page)
- 4900 (1 page)
- 4931 (2 pages)
- 4100 (2 pages)
- 15565 (1 page)
- 15529 (2 pages)
- 15509 (2 pages)
- 15635 (2 pages)
- 15578 (2 pages)
- 15777 (1 page)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15688 (2 pages)
- 15717 (2 pages)
- 15511 (1 page)
- 15620 (1 page)
- 15415 (2 pages)
- 15671 (1 page)