Extron electronic Multi-Graphic Processor MGP 464 DI - Manual (Page 60)

Software Configuration and Control, cont’d
MGP 464 • Software Configuration and Control 4-8
PRELIMINAR
Y
X51& = Advanced picture settings value
(Range is the auto-sensed value ±512 lines or
pixels.)
X51* = Window dissolve speed; 0 to 5 seconds in
0.1 second increments (e.g., 01 = 0.1 second;
50 = 5.0 seconds)
X51( = Internal temperature in degrees Fahrenheit
X52) = Text string of up to 200 characters. Permitted
characters include letters A-Z, digits 0-9,
and the minus sign (–). No blank or space
characters are permitted as part of a name.
No distinction is made between upper- and
lowercase letters. The first character must be
a letter. The last character cannot be a minus
sign.
X52! = Image/Window shift value (Zero location is
2048, and limits are ± the output resolution.)
Example: Front panel displays +50, but the
response to the SIS command is 2098.
X52@ = Window size. The minimum size is 1/16 the size
of the output active area. The maximum size is
the active output area.
X52# = Image size. The minimum size is 1/16 the size of
the input active area. The maximum size is
double the active output area for 200% zoom.
X52$ = Window preset effect
0 = Cut
1 = Real time motion
N Recalling a window preset with the windows in
new positions causes the windows to move to the
new location and resize in a fluid motion.
X52% = Red, green, or blue color value (0-255)
X52& = Window priority (1 through 4, where 1 is top
priority and 4 is lowest priority)
X50& = Picture adjustment range
(0 - 127; default = 64)
X50* = Scaler resolution
1 = 640 x 480
2 = 800 x 600
3 = 852 x 480
4 = 1024 x 768
5 = 1024 x 852
6 = 1024 x 1024
7 = 1280 x 768
8 = 1280 x 1024
9 = 1360 x 765
10 = 1365 x 768
11 = 1366 x 768
12 = 1365 x 1024
13 = 1400 x 1050
14 = 1600 x 1200
15 = 480p
16 = 576p
17 = 720p
18 = 1080i
19 = 1080p
20 = DVI background input resolution
X50( = Detected input signal standard
0 = None
1 = NTSC
2 = PAL
4 = SECAM
– = Not applicable (occurs when input
is set for RGB or YUV)
X51) = Sharpness (detail) level (0 through 127)
X51! = Window transition effect type
1 = Cut
2 = Dissolve
3 = Soft wipe up
4 = Soft wipe down
5 = Soft wipe right
6 = Soft wipe left
7 = Soft wipe center in
8 = Soft wipe center out
9 = Soft wipe square in
10 = Soft wipe square out
11 = Soft wipe curtain in
12 = Soft wipe curtain out
13 = Hard wipe up
14 = Hard wipe down
15 = Hard wipe right
16 = Hard wipe left
17 = Hard wipe center in
18 = Hard wipe center out
19 = Hard wipe square in
20 = Hard wipe square out
21 = Hard wipe curtain in
22 = Hard wipe curtain out
X51@ = Blanking adjustment range (0 through 255;
default is 128.)
X51# = Window preset (1 through 128)
X51$ = Input preset (1 through 128)
X51% = Scaler refresh rate
1 = 50 Hz
2 = 60 Hz
3 = 72 Hz
4 = 96 Hz
5 = 100 Hz
6 = 120 Hz
7 = DVI background input refresh rate
X51^ = Pixel phase (0-31)