Wiring map for serial cable, Wiring map for serial cable 3-9, Table 3-1 – Enterasys Networks V2H124-24P User Manual
Page 43: Serial cable wiring
Connecting to the Console Port
3-9
3
Wiring Map for Serial Cable
Table 3-1. Serial Cable Wiring
The serial port’s configuration requirements are as follows:
• Default Baud rate—9,600 bps
• Character Size—8 Characters
• Parity—None
• Stop bit—One
• Data bits—8
Switch’s 9-Pin
Serial Port
Null Modem
PC’s 9-Pin
DTE Port
2 RXD (receive data)
<---------------------------- 3 TXD (transmit data)
3 TXD (transmit data)
-----------------------------> 2 RXD (receive data)
5 SGND (signal ground) ------------------------------ 5 SGND (signal ground)
No other pins are used.