Emerson 200I/48-NT5C05C User Manual

Page 23

Installation 23

Emerson Energy Systems

Rectifier 200I/48



NT5C05C Installation and User Manual

3.5.

Connecting the dc output terminals to the busbars

The dc outputs of the rectifier are connected to the busbars as illustrated in
Figure 5. There are two methods :

•

BAT GRD ( + ) of the rectifier connected to the CHG/ DISCH
GRD busbar and the –48 V of the rectifier connected to the
CHG BAT busbar

•

BAT GRD ( + ) of the rectifier connected to the CHG GRD
busbar and the -48V of the rectifier connected to the CHG/
DISCH BAT busbar

Figure 5 - Connecting the dc to the busbars with a shunt on the battery side or a shunt on

the ground side

RECTIFIER

BAT GRD

-48V

CHG / DISCH

GRD BUSBAR

CHG BAT

BUSBAR

SHUNT

DISCHARGE

BAT BUSBAR

FUSE

PANEL

LOAD

SHUNT ON THE BATTERY SIDE