Emerson 200I/48-NT5C05C - Manual (Page 17)

17
Emerson Energy Systems Rectifier 200I/48

NT5C05C Installation and User Manual
3. Installation
3.1. Mounting configurations
The NT5C05CA / CB / CC rectifiers are designed for installation in a
1200 A cabinet ( NT6C43CB ) or in a standard frame ( NT6C40 or
equivalent ). In this chapter, a different procedure is provided for each
mounting method. The rectifiers are shipped loose, not mounted in the
frame or cabinet. Upon reception, remove the rectifier from its shipping
carton and inspect it for physical damage. Report any damage to your
immediate supervisor.
3.2. Tools and test equipment
The following tools and test equipment are required :
•
screwdriver, flat blade, 3/16 inch ( 5 mm )
•
potentiometer screwdriver, Bourns No. 60, or equivalent
•
heavy cable strippers or electrician’s knife
•
heavy cable cutters ( AWG 4/0 or metric No. 110 )
•
nut drivers ( set )
•
socket set ( 1/2 inch or 15 mm drive )
•
torque limiting wrench ( 1/2 inch. or 15 mm drive )
•
crimper, T&B, 15CA54R Violet die
•
digital multimeter, Fluke 8000A or equivalent
3.3. Cautions and Warnings
The following precautions must be adhered to at all times when handling
and installing power equipment.
CAUTION
Protecting the premises
Protect the floors and walls against damage with sheets of
plywood, cardboard, or other suitable material when
handling the equipment.