Eagle Electronics CUDA 350 S/MAP - Manual (Page 72)

64
1. From the Sonar Page, press
MENU
| ↓ to
D
EPTH
R
ANGE
|
ENT
.
Sonar Page menu with Depth Range command selected (left). The
Depth Range Control Scale (right).
2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif-
ferent depth range. A dark bar highlights the selected range. Range
numbers in gray cannot be selected.
3. When the new range is selected, press
EXIT
to close the menu.
Depth Range - Manual
You have complete control over the range when the unit is in the man-
ual mode. There are 12 depth ranges, from 5 feet to 800 feet.
To switch to Manual Depth Range:
1. Turn off automatic depth range. From the Sonar Page, press
MENU
| ↓
to
A
UTO
D
EPTH
R
ANGE
|
ENT
.
2. Press ↑ to
D
EPTH
R
ANGE
|
ENT
and the Depth Range Control Scale ap-
pears.
3. Press
↓ or ↑ to select a different depth range. A horizontal dark bar
highlights the selected range.
4. When the new range is selected, press
EXIT
to close the menu.
To turn Auto Depth Range on again:
1. From the Sonar Page, press
MENU
| ↓ to
A
UTO
D
EPTH
R
ANGE
|
ENT
|
EXIT
.