Eagle Electronics CUDA 350 S/MAP - Manual (Page 169)

161
Communications Port Activation
Now that you have your devices connected, here's how to make them
communicate. This unit can connect to either an accessory such as a
speed or temperature sensor or a NMEA 0183 data cable. In order to use
the Communications Port for NMEA data, you first need to activate
NMEA 0183 Output.
Press
MENU
|
MENU
| ↓ to
E
NABLE
NMEA 183 O
UTPUT
|
ENT
| ← to
Y
ES
|
ENT
.
Enable NMEA command on the unit's Main Menu
Communications Port Configuration
Once NMEA 0183 Output has been enabled from the Main Menu, the
Com Port command appears in the System Setup Menu. It allows you
to configure the communications port.