Eagle Electronics CUDA 350 S/MAP - Manual (Page 107)

99
9. At destination, Arrival Alarm goes off; to clear it, press
EXIT
. Cancel
navigation: press
MENU
|
MENU
| ↓ to
C
ANCEL
N
AVIGATION
|
ENT
| ← to Y
ES
|
ENT
.
10. Return to Wpt 1 by Backtrack Trail. Press
MENU
|
MENU
| ↓ to
M
Y
T
RAILS
|
ENT
. Press ↓ to Trail 1|
ENT
| ↓ to
N
AVIGATE
|
ENT
| → to
R
EVERSE
R
OUTE
|
ENT
| ← to
N
AVIGATE
R
OUTE
|
ENT
. (If arrival alarm sounds, press
EXIT
.) Follow navigation displays.
11. Back home, Arrival Alarm goes off; press
EXIT
. Cancel navigation:
press
MENU
|
MENU
| ↓ to
C
ANCEL
N
AVIGATION
|
ENT
| ← to Y
ES
|
ENT
.
12. To turn off the unit, press and hold
PWR
key for three seconds.
Find Your Current Position
Turn on the unit. It automatically searches for satellites and calculates
its position in approximately one minute or less, under clear sky condi-
tions.
NOTE:
Clear sky means open sky, unobstructed by terrain, dense foliage or
structures. Clouds do not restrict GPS signal reception.
If for some reason satellite acquisition takes longer, you may be inside
a structure or vehicle or in terrain that is blocking signal reception. To
correct this, be sure you are positioned so the unit's antenna module
has as clear a view of the sky as possible, then turn the unit off and
back on again.
Moving Around the Map: Zoom & Cursor Arrow Keys
The map is presented from a bird's eye view perspective. The current
zoom range shows in the lower left corner of the screen.
1. Press the
ZIN
key (zoom in) to move in closer and see greater detail in a
smaller geographic area.
2. Press the
ZOUT
key (zoom out) to move farther away and see less map
detail, but a larger geographic area.