Eagle Electronics CUDA 350 S/MAP - Manual (Page 131)

123
Route Planning command on Main Menu (left). Routes menu (center);
Edit Route menu (right). Navigate Route command is selected.
2. Press ↓ to select route name|
ENT
|
ENT
.
3. Upon arrival at your destination, cancel navigation:
press
MENU
|
MENU
| ↓ to
C
ANCEL
N
AVIGATION
|
ENT
| ← to Y
ES
|
ENT
.
The following figures show what the Navigation Page and Map Page
look like while navigating a route.
Fig. 1 shows the Navigation Page at the start of a route, heading straight
for the first waypoint (Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1;
the arrival alarm has been triggered and the bearing arrow on the com-
pass rose has turned to point toward Wpt 2, off to the northeast.
Figure 2. Figure 1.