Eagle Electronics CUDA 350 S/MAP - Manual (Page 126)

118
Routes
A route is a series of waypoints, linked together in an ordered sequence
to mark a course of travel. You can visualize a route as a string of
beads. The beads represent waypoints and the string represents the
course of travel connecting waypoint to waypoint.
The course from one waypoint to the next is a leg. Routes are composed
of one or more legs. The legs of all GPS routes are based on straight
lines between waypoints.
A route provides the automatic capability to navigate through several
waypoints without having to reprogram the unit after arriving at each
waypoint. Once programmed into the GPS unit, a route gives users the
option of navigating forward through the route waypoints or in reverse
order. You can even begin navigating in the middle of a route!
Create and Save a Route
You can create a route by selecting existing waypoints from the way-
point list or you can set a series of route waypoints on the map with the
cursor and Enter key. In this example, we create a route from the map.
1. From the
N
AVIGATION
P
AGE
, press
MENU
|
ENT
or from the
M
AP
P
AGE
,
press
MENU
|
MENU
| ↓ to
R
OUTE
P
LANNING
|
ENT
.
Route Planning command on Main Menu (left)
will open the Route List screen (right).