Eagle Electronics CUDA 350 S/MAP - Manual (Page 123)

115
3. Move the cursor to the second position. The rubber band line reap-
pears, connecting the first point you set to the cursor. The distance
along that line will appear in the box at the bottom of the screen.
4. Press
EXIT
to clear the command and return to the page screen.
Icons
Icons are graphic symbols used to mark some location, personal point of
interest or event. They can be placed on the map screen, saved and re-
called later for navigation purposes. These are sometimes referred to as
event marker icons. The Cuda has 42 different symbols you can pick
from when creating an icon.
Icons are similar to waypoints, but they do not store as much informa-
tion as waypoints do. You can not use a menu to navigate to icons as
you can with waypoints. But, you can use the map cursor and navigate
to any icon on the map.
An icon can be created at the cursor position on the map or at your cur-
rent position while you are navigating.
Create Icon on Map
1. Use the arrow keys to move the cursor to the place where you want
to make an icon.
2. Press
ENT
and the screen shows the Select Icon Symbol menu.
3. Press ← or ↑ or → or ↓ to select the desired icon, then press
ENT
. The
icon appears on the map.