Eagle Electronics CUDA 350 S/MAP - Manual (Page 127)

119
2. To add to an existing route, use ↓↑ to route name|
ENT
. Press ↓ to
(R
OUTE END
)
|
ENT
| ↓ to
A
DD
F
ROM
M
AP
|
ENT
. The Map Page appears with
the cursor showing. (If you wanted to create a new route, highlight
N
EW
R
OUTE
at the top of the Route list window and press
ENT
.)
Edit Route menu (left). Edit Route Waypoints menu (right),
with Add From Map command selected.
3. Use the Zoom keys and arrow keys to move the map and cursor until
the cursor is centered on the spot where you want your route to begin.
(If you are starting at your current position or the current cursor posi-
tion, you are already at the starting spot.)
4. Set the first route waypoint and press
ENT
. In this example, we
started our route at the entrance of the cove where our boat was docked
to a promising fishing spot next to an oil platform.