Eclipse - Fujitsu Ten CD5425E User Manual
Page 48
112
Various Settings
Enters sound adjustment mode.
When the button is turned, the
setting item changes in the following
order.
X-OVER FR
➔ X-OVER NF
➔ NON-FADER ➔ X-OVER FR www
Crossover adjustment
(X-Over F/R)
The HPF (high-pass filter) for front and rear
speakers can be switched ON and OFF.
The mode will change to crossover
f/r setting mode.
ATTENTION
The set value of the HPF is 100 Hz, 18
db/oct.
The selected settings will take effect.
At this time, other adjustments can
also be made in sound adjustment
mode.
Crossover adjustment
(X-Over NF)
The LPF (low-pass filter) for sub-woofer can be
switched ON and OFF.
The mode will change to crossover nf
setting mode.
ATTENTION
The set value of the LPF is 80 Hz, 18 db/
oct.
The selected settings will take effect.
At this time, other adjustments can
also be made in sound adjustment
mode.
Making changes with Sound
Adjustment Mode
1
Press the [SOUND] button more
than one second.
2
Turn the [SEL] button to select a
setting item.
1
Turn the [SEL] button to select
X-Over F/R.
2
Press the [SEL] button.
3
Turn the [SEL] button to select
ON or OFF.
4
Press the [SEL] button.
5
Press the [RTN] button.
6
Press the [SOUND] or [RTN]
button to exit sound adjustment
mode.
1
Turn the [SEL] button to select
X-Over NF.
2
Press the [SEL] button.
3
Turn the [SEL] button to select
ON or OFF.
4
Press the [SEL] button.
5
Press the [RTN] button.
6
Press the [SOUND] or [RTN]
button to exit sound adjustment
mode.