Eclipse - Fujitsu Ten CD5425E - Manual (Page 40)

„ 104 „
Various Settings
ATTENTION
• If the incorrect CD is inserted, an
[ERR_ ] ("ERR" and error number)
message will appear for two
seconds, after which the CD will
be ejected.
• If [ERR5] (the 5th time an error
has occurred) appears, [HELP] will
appear, after which the CD will be
ejected. When [HELP] appears,
carry out the operations for an
ESN security lock out by following
the procedure in "What happens if
an incorrect CD is inserted?" on
page 104.
• You must be use the same CD
used for Key CD programming; a
duplicate CD may not work
properly.
What happens if an incorrect CD is
inserted?
After the [HELP] message will
appear for five seconds, serial
number will appear.
After the [SEC] message will appear
for two seconds, rolling code (six
digit) will appear.
[DISC] flashes on the display.
You will have five more attempts the
to insert correct disc.
If the correct CD is inserted, an [OK]
message will appear for two seconds
and the CD will be ejected.
ATTENTION
• If an incorrect CD is inserted, an
[ERR_ ] ("ERR" and error number)
message will appear for two
seconds, after which the CD will
be ejected.
• This process cancels the
protection for ESN deck.
1
After the 5th incorrect attempt,
the display reads [HELP] for five
seconds.
2 Press the [CD ] button to close
the front panel.
3
Press the [FUNC] button, then
button [6], and hold them for five
seconds.
4 Press the [FUNC] button.
5 Insert the Key CD into the slot.
● Note ●
If after 5 tries the correct Key CD is not
inserted, the display reads [CALL]; the
unit must be returned to Eclipse to be
reset. In this case, please contact your
Eclipse dealer for assistance.
Your Key CD can be easily forgotten.
Write the album name in a reminder
note (See page 125).