Eclipse - Fujitsu Ten CD5425E - Manual (Page 41)

ESN security operating procedure
„ 105 „
Once ESN security is activated, the indicator
flashes whenever the vehicle's ignition switch is
turned off, warning potential thieves that the
unit is protected. However, if do not want this
visible deterrent, it may be turned off.
[IND. FLASH] means the security
indicator will flash when the vehicle's
ignition switch is off, and [IND.-----]
means it will not. Repeat the above
steps to reactivate the flash mode.
[ESN] appears on the display,
followed by an eight-digit number;
this number is your electronic serial
number (ESN). You may use this
number to identify your Eclipse
CD5425E in the event of theft
recovery.
How to turn the security
indicator on/off
1
With the unit in standby, press the
[FUNC] button, then button [2]
and hold both for more than one
second.
2
[IND. FLASH] or [IND.-----]
appears on the display.
How to read the Electronic
Serial Number
1 Check that the unit is in standby.
2
Press and hold the [FUNC]
button, then button [4], and hold
both for more than one second.
VIII