Eclipse - Fujitsu Ten CD5425E - Manual (Page 35)

How to use the optional remote control
„ 99 „
Selecting a station (manually or
automatically)
A short press of the button will allow manual
station tuning. Pressing for more than one
second will start automatic tuning.
[ ] button:
Tunes to higher frequency
stations.
[ ] button:
Tunes to lower frequency stations.
Selecting preset stations
A total of six stations may be selected (preset
tuning) out of those already set in memory
through the main unit. (Refer to "Manually
setting stations into memory" on page 93.)
[ ] button:
Select the next higher number
preset button.
[ ] button:
Select the next lower number
preset button.
Switching disc modes
The disc mode is activated.
When one or two CD changers are
connected, press the [BAND] or
[DISC] button to change modes
from CD player
➔ CD changer 1 ➔
CD changer 2.
The indicator will skip a changer or
player that has no discs loaded.
Advancing to the next track or returning to the
beginning of the track being played
[ ] button:
Advances to the next track.
[ ] button:
Returns to the beginning of the
track being played.
(Press repeatedly to move to
previous tracks.)
ATTENTION
Hold the [ ] button down to fast forward,
or the [ ] button to rewind through the
track being played.
Skipping to the next or previous
disc
[ ] button:
Selects the next higher number
disc.
[ ] button:
Selects the next lower number
disc.
1
Press the [ TUNE•SEEK ]
button.
1
Press the [ PRESET CH ]
button.
How to play CDs
1 Press the [DISC] button.
2
Press the [BAND] or [DISC]
button.
1 Press the [ TRACK ] button.
1 Press the [ DISC ] button.
VII