Eclipse - Fujitsu Ten CD5425E - Manual (Page 38)

„ 102 „
Various Settings
ESN security operating procedure
This deck incorporates ESN (Eclipse Security
Network). The ESN is a security system which
disables all deck functions when the power is
restored if the deck is stolen from the vehicle.
Once the ESN is activated, removing power to
the deck or vehicle will activate the security
feature. Setting or canceling of the security
feature can be done with a "Key CD". It is
necessary to register a music CD as the "Key
CD" in advance.
How to program the Key CD
A [SEC] message appears, in two
seconds it will change to [DISC].
ATTENTION
• If a CD has already been inserted,
a [SEC] message appears, and
then the front panel opens and the
CD is ejected.
• If a security is activated,
programming the Key CD is not
available.
The front panel opens; The
CD5425E is now ready for your Key
CD in the CD slot.
A [SEC] message appears, then the
Key CD is ejected.
The front panel closes.
ATTENTION
• If there is a problem with the
inserted CD, an [ERR] message
will appear for two seconds and
the CD will be ejected. Reinsert
the ejected CD.
• If a CD causes the [ERR] message
to appear twice in a row, a
[CHANGE] message will appear
for two seconds. Try another CD.
• Copy Protected CD and MP3 CD-
ROM cannot be programmed for Key
CD security.
• The Security indicator will flash
whenever the vehicle's ignition is
switched off.
About ESN
How to operate the ESN (Key
CD) security
1 Check that the unit is in standby.
2
Press and hold the [FUNC]
button, then button [6], and hold
both for more than one second.
3 Press the [CD ] button.
4 Insert the CD into the slot.
5 Press the [CD ] button.