Caution – Eclipse - Fujitsu Ten CD5425E User Manual
Page 17
How to operate the CD player
81
The front panel opens.
If a disc has already been loaded,
the disc is ejected by pressing the
[CD
] button.
The CD will immediately start
playing.
ATTENTION
When a CD is already loaded, press the
[DISC] button to switch to the CD mode.
First press the [DISC] button for less than one
second to switch to the disc mode. It is
assumed here that a CD has already been
loaded into the unit.
This starts CD play.
If an external CD changer is
connected, each additional press of
the [DISC] button will switch modes
from CD player
➔
CD changer 1
➔
CD changer 2
➔
CD player.
A changer or player with no discs
loaded will be skipped.
ATTENTION
• Playback may be intermittent
when there is a scratch on a CD or
when the recorded side is dirty.
• Only two external CD changers
may be connected.
Turn to the right:
Advances to the next track.
Turn to the left:
Returns to the beginning of the track
being played. (Repeat turning for
previous tracks.)
Listening to CD
1
Press the [CD
] button.
2
Insert a CD into the disc slot,
label side up.
CAUTION
Do not press the
[
CD
]
button while CD is
being inserted. This could cause an injury
and damage to the front panel.
Switching to the CD player
mode
1
Press the [DISC] button for less
than one second to switch to the
CD player mode.
Advancing to the next track
or returning to the beginning
of the track being played
1
Turn the [SEL] button to the left or
right.
IV