Epson 7800 - Manual (Page 15)

R4CD380/E850
Unpacking and Setup Guide
Rev.C
ENGLISH.FM A4 size
4/6/05
R Proof Sign-off:
KOW M.Arai K.Nishi
K.Nishi
NOC K.Lee
15
En
g
lis
h
4. Insert the top horizontal strut into the right
and left legs. Use a screw driver to fasten the
strut with hex socket head bolts with washers
(J).
5. This completes assembly of the Stand. Make
sure each part of the Stand is tightened
securely.
Mounting the printer on the Stand
c Caution:
Two or more people are required to mount the
printer. Hold the printer at the indicated
locations as shown. If the ink cartridges are
installed, do not tip the printer at an angle.
Otherwise, ink may leak from the cartridges.
1. Lock the two casters and extend the two
stabilizer knobs underneath the base unit.
Note:
Place the casters sideways and lock them so they
will not move.
2. Mount the printer on the printer mount as
shown.
3. Fasten the bottom of the printer and the
printer mount with wing screws (L) and
washers (M)
4. This completes the mounting procedure.
Make sure the printer and the Stand are
fastened together securely.
J
J
J
M
L
M
L