beautypg.com

Epson 7800 User Manual

Page 12

background image

R4CD380/E850
Unpacking and Setup Guide
Rev.C

ENGLISH.FM

A4 size

4/6/05

L

Proof Sign-off:
KOW M.Arai K.Nishi
K.Nishi
NOC K.Lee

12

❏ Place the printer on a desk. If you cannot place

the printer on a desk, you will need the Stand.
If you place your printer on a desk, follow the
guidelines listed below.

❏ Choose a desk that can hold the printer

weight (about 49 kg) and has a height of
600-800 mm from the floor.

❏ Make sure the surface is flat and stable.

❏ Place the front rubber legs of the printer

just at the end of the desk.

❏ Leave enough room (over 600 mm) in

front of the desk.

❏ Prevent your printouts from getting dirty

or crinkled.

❏ Use a grounded power outlet. Do not use a

damaged or frayed power cord. Avoid using
an outlet that is shared with other appliances.

❏ Use only an outlet that meets the power

requirements of this printer.

❏ Operate the printer under the following

conditions:

❏ Avoid locations that are subject to direct

sunlight, excessive heat, moisture, or dust.

❏ Do not block the ventilation openings.

❏ Avoid locations near potential sources of

interference such as loud speakers or cordless
phones.

❏ Avoid locations near TVs, radios, air

conditioners, or humidifiers.

❏ Avoid locations that are subject to shocks or

vibrations.

❏ Keep the printer away from combustible

substances.

❏ Keep the printer away from dusty areas.

Deciding Where to Unpack the Printer

Before unpacking, read the followings:

❏ Setup and assemble the printer near to the

chosen place of use, as moving the printer may
result in damage.

❏ Allow floor space of 2.5 × 2.5 m approx., and

height of at least two times that of the larger
box containing the printer unit.

Unpacking the Printer

c

Caution:

The printer unit is heavy and unwieldy.
Have two people unpack the printer.

1. Open the box containing the printer and

remove the roll paper spindle with roll paper,
polystyrene foam, and cardboard cushions
from around the printer.

2. Remove the fixers from the sides of the box.

Temperature: 10 to 35°C

Humidity:

20 to 80% without condensation

This manual is related to the following products: