Casio QV-5700 2 - Manual (Page 22)

OTHER RECORDING FUNCTIONS
75
Using Digital Zoom
You can use digital zoom to enlarge the center portion of the
screen. Note that digital zoom becomes available only after
optical zoom reaches its maximum setting. The following
shows the range that is available with digital zoom.
Zoom Factor Range: 3x to 9.6x
(combination with optical zoom)
1.
Align the power/function switch with .
2. Press MENU.
3.
Select “Digital Zoom” and then rock the con-
trol button to the right.
4.
Select “On” to enable digital zoom, and then
click the control button.
• Selecting “Off” disable digital zoom.
5.
Press MENU to exit the setting procedure.
6.
Push the zoom contoller upwards towards
(telephoto)
to zoom in.
• The current zoom setting is indicated on the monitor
screen by a zoom bar. The current zoom setting
marker appears within the optical zoom bar when you
are using optical zoom only, and within the digital
zoom bar when you are using optical and digital zoom
in combination.
• When the zoom setting marker reaches the top of the
optical zoom bar (maximum optical zoom), it stops.
Release zoom controller and then push it upwards to-
wards
(telephoto) again to move the zoom set-
ting marker into the digital zoom bar.
7.
Press the shutter release button to record the
image.
Digital
zoom bar
Optical
zoom bar
Current zoom
Setting marker